Craftsman T110 Riding Mower Owner's Manual

The Craftsman T110 is a 42-inch deck riding lawn mower powered by a Briggs & Stratton 547cc engine, featuring a 7-speed shift-on-the-go transmission, electric start, cruise control, and a comfortable high-back seat. This manual covers safety, operation, maintenance, troubleshooting, and storage procedures to ensure optimal performance and longevity of your mower. Below are key sections for safe operation, features, setup, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Specifications 5. Controls and Operation 6. Mowing Instructions 7. Maintenance Schedule 8. Storage Procedures 9. Troubleshooting 10. Warranty Information

Features at a Glance

Key components: 42-inch stamped steel cutting deck, Briggs & Stratton 547cc OHV engine, 7-speed manual transmission, electric start with key, cruise control, high-back seat, cup holder, and headlight.

Feature	Description
Engine	Briggs & Stratton 547cc OHV, single cylinder
Cutting Width	42 inches
Transmission	7-speed shift-on-the-go manual
Starting System	Electric key start with 12V battery
Deck Material	Stamped steel with anti-scalp rollers
Seat	High-back, adjustable
Fuel Capacity	2.5 gallons
Cutting Height Adjustment	Lever for 1.5 to 4 inches
Drive System	Rear-wheel drive
Additional Features	Cruise control, cup holder, headlight

Safety Information

Read and understand all safety instructions before operating.

Clear mowing area of debris, toys, and obstacles.
Wear appropriate clothing: sturdy shoes, eye protection, hearing protection.
Never carry passengers; only the operator should be on the mower.
Do not mow on slopes greater than 15 degrees; mow across slopes, not up and down.
Stop engine and remove key before performing maintenance or clearing blockages.

WARNING! Gasoline is flammable; refuel outdoors with engine off and cool. Keep children and pets away from the mowing area.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools.

Install steering wheel: Align and tighten bolt.
Attach seat: Position seat on frame and secure with provided bolts.
Connect battery: Attach red (+) then black (-) cables to battery terminals.
Check tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).
Add engine oil: Use SAE 30 (above 32°F) or 10W-30 (all temperatures) to full mark on dipstick.
Add gasoline: Use fresh unleaded gasoline with minimum 87 octane.

CAUTION! Ensure all bolts are tightened securely. Do not start engine without proper oil level.

Specifications

Model: Craftsman T110
Engine: Briggs & Stratton 547cc OHV
Cutting Deck: 42-inch stamped steel
Transmission: 7-speed manual shift-on-the-go
Cutting Height Range: 1.5 to 4 inches
Fuel Type: Unleaded gasoline (87 octane minimum)
Fuel Capacity: 2.5 gallons
Oil Capacity: 48 oz (1.5 quarts)
Battery: 12V, 230 CCA
Weight: 415 lbs

Controls and Operation

Familiarize yourself with all controls before starting.

Dashboard: Ignition key, headlight switch, hour meter, choke (if equipped).

Steering/Driving: Steering wheel, brake pedal, forward/reverse pedal, gear shift lever (1-7), cruise control lever.

Mowing Controls: Deck engagement lever, cutting height adjustment lever, parking brake.

Starting Procedure: Sit on seat, set parking brake, ensure PTO (deck) is disengaged, turn key to START. Release key to RUN position once engine starts.

Stopping: Disengage PTO, set parking brake, turn key to OFF, remove key.

Mowing Instructions

For best results and even cut.

Inspect area: Remove sticks, stones, and debris.
Set cutting height: Adjust lever to desired height (higher for first mow of season).
Start mower: Follow starting procedure.
Engage blades: Move PTO lever to ON position at full throttle.
Mow in overlapping passes: Change pattern each time to prevent ruts.
On slopes: Mow across, not up and down. Avoid turns on slopes.
Disengage blades: Move PTO lever to OFF before stopping or reversing.

Tip: Mow when grass is dry for a cleaner cut and to prevent clumping.

Maintenance Schedule

Regular maintenance ensures long life and reliable operation.

Interval	Task
Before each use	Check tire pressure, engine oil level, fuel level. Inspect for loose parts.
Every 8 hours	Check battery terminals for corrosion.
Every 25 hours	Change engine oil (first change at 8 hours). Check air filter, clean if dirty.
Every 50 hours	Replace air filter. Lubricate deck spindles and pivot points.
Every 100 hours	Replace spark plug. Check blade condition and sharpness.
Seasonally	Sharpen or replace blades. Clean underside of deck. Check transmission fluid.

WARNING! Always disconnect spark plug wire before performing any maintenance on blades or deck.

Storage Procedures

Proper storage prevents fuel system issues and corrosion.

Clean mower: Remove grass clippings and debris from deck and engine.
Fuel treatment: Add fuel stabilizer to tank, run engine for 5 minutes to circulate, or drain fuel completely.
Battery: Disconnect negative cable, store in cool, dry place, charge monthly.
Engine oil: Change oil if near due interval.
Storage location: Store in a dry, covered area, preferably off concrete floor.

CAUTION! Never store mower with gasoline in tank in an enclosed area near open flame or spark.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel tank, clogged fuel filter, faulty spark plug	Charge/replace battery, add fuel, replace fuel filter/spark plug.
Engine runs rough or stalls	Dirty air filter, old gasoline, water in fuel	Clean/replace air filter, drain and replace with fresh gasoline.
Uneven cutting	Dull/bent blades, uneven tire pressure, deck not level	Sharpen/balance blades, adjust tire pressure, level deck.
Excessive vibration	Loose blade, damaged spindle, debris on deck	Tighten blade bolt, inspect spindle, clean deck.
Loss of power	Clogged mower deck, worn drive belt	Clean deck underside, inspect and replace drive belt if worn.

Reset: For electrical issues, disconnect battery for 5 minutes then reconnect.

Warranty Information

The Craftsman T110 is covered by a limited warranty. Refer to your original purchase documentation for specific terms and duration. Warranty does not cover damage from misuse, lack of maintenance, or use of non-genuine parts. For warranty service, contact an authorized Craftsman service center with your proof of purchase. For support, visit www.craftsman.com or contact 1-888-331-4569.