Craftsman T110 Riding Lawn Mower Manual

The Craftsman T110 is a 19.5 HP gasoline-powered riding lawn tractor designed for residential use. It features a 42-inch cutting deck, hydrostatic transmission, 6-speed gear drive, electric start, adjustable cutting height, and a comfortable high-back seat. Below are key sections for safety, features, operation, maintenance, troubleshooting, and specifications.

1. Features at a Glance 2. Safety Instructions 3. Assembly & Setup 4. Controls and Operation 5. Specifications 6. Cutting Deck Operation 7. Maintenance Schedule 8. Engine Care 9. Storage & Winterization 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: 19.5 HP Briggs & Stratton engine, 42-inch stamped steel cutting deck, Hydrostatic transmission, Electric start, High-back seat, Headlights, Cup holder, Manual PTO engagement.

Feature	Description
Engine	19.5 HP Briggs & Stratton, single-cylinder, gasoline
Cutting Deck	42-inch, 3-blade, stamped steel
Transmission	Hydrostatic, infinite forward/reverse speeds
Starting System	Electric key start with 12V battery
Cutting Height	Adjustable from 1.5 to 4 inches (6 positions)
Seat	High-back, adjustable for operator comfort
Fuel Capacity	2.5 gallons
Headlights	Integrated for low-light operation
Drive System	Rear-wheel drive
PTO Engagement	Manual lever

Safety Instructions

Read and understand all safety instructions before operating.

Wear appropriate clothing: sturdy shoes, eye protection, long pants.
Clear mowing area of debris, toys, and obstacles before starting.
Never carry passengers; the mower is designed for one operator only.
Do not mow on slopes greater than 15 degrees; mow across slopes, not up and down.
Disengage blades and set parking brake before dismounting.

WARNING! Gasoline is flammable; refuel outdoors with engine off and cool. Keep hands and feet away from moving parts.

Assembly & Setup

Unpack and inspect contents. Assembly requires basic tools.

Install steering wheel: Align and tighten bolt.
Attach seat: Mount using provided bolts and washers.
Connect battery: Attach red (+) then black (-) terminals.
Add engine oil: Use SAE 30 or 10W-30 (check manual for capacity).
Add gasoline: Use fresh, unleaded gasoline (87 octane or higher).
Check tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).

CAUTION! Ensure all bolts are tightened securely. Keep assembly area clean and well-lit.

Controls and Operation

Familiarize yourself with controls before starting.

Dashboard: Ignition key, PTO engagement lever, Choke, Throttle, Parking brake, Hour meter.

Pedals: Forward/reverse speed control (hydrostatic), Brake pedal.

Starting Procedure:

Set parking brake.
Disengage PTO (blades off).
Move throttle to FAST position.
Turn ignition key to START; release when engine starts.
Allow engine to warm up for 30 seconds.

Stopping: Disengage PTO, set parking brake, move throttle to SLOW, turn key to OFF.

Specifications

Engine: 19.5 HP Briggs & Stratton, 540cc, OHV.
Cutting Width: 42 inches.
Transmission: Hydrostatic, infinite speeds.
Cutting Height: 1.5 - 4 inches (6 positions).
Fuel Type: Unleaded gasoline (87 octane minimum).
Fuel Capacity: 2.5 gallons.
Battery: 12V, 230 CCA.
Tire Size: Front 15x6.00-6, Rear 20x8.00-8.
Weight: Approx. 450 lbs.
Warranty: 2-year limited warranty.

Cutting Deck Operation

Engage and adjust cutting deck for optimal performance.

Adjust cutting height: Use lever to select desired height (1.5 to 4 inches).
Engage blades: Move PTO lever to ON position (engine at full throttle).
Mow in overlapping passes for even cut.
Disengage blades when crossing driveways or gravel areas.
Clean deck after each use to prevent grass buildup.

Tip: For best results, mow when grass is dry. Keep blades sharp for clean cut.

Maintenance Schedule

Interval	Task
Before each use	Check tire pressure, fuel level, deck for debris
Every 8 hours	Check engine oil level
Every 25 hours	Change engine oil (first 5 hours for break-in)
Every 50 hours	Replace air filter, check spark plug
Every 100 hours	Replace spark plug, check drive belt tension
Seasonally	Sharpen blades, grease fittings, check battery

Note: Refer to engine manual for specific engine maintenance.

Engine Care

Proper engine maintenance ensures long life and reliable performance.

Oil Change: Use SAE 30 or 10W-30 detergent oil. Capacity: approx. 48 oz. Change when warm.
Air Filter: Clean foam pre-cleaner every 25 hours; replace paper element every 50 hours.
Spark Plug: Gap 0.030 inches. Replace annually or every 100 hours.
Fuel Filter: Replace annually or if engine runs poorly.
Cooling Fins: Keep clean to prevent overheating.

WARNING! Disconnect spark plug wire before performing any maintenance.

Storage & Winterization

Prepare mower for extended storage (e.g., winter).

Clean entire mower, especially cutting deck.
Change engine oil and replace filter.
Add fuel stabilizer to gas tank; run engine for 5 minutes.
Disconnect battery; store in cool, dry place.
Store in dry, covered area; cover with tarp if outdoors.

CAUTION! Do not store with gasoline in carburetor; run engine dry or use stabilizer.

Warranty Information

Craftsman T110 includes a 2-year limited warranty covering defects in materials and workmanship. Warranty does not cover normal wear, misuse, or lack of maintenance. For warranty service, contact Craftsman customer service at 1-888-331-4569 or visit www.craftsman.com. Keep original receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, clogged filter	Charge/replace battery; add fuel; replace fuel filter.
Engine runs poorly	Dirty air filter, old spark plug	Clean/replace air filter; replace spark plug.
Uneven cutting	Dull blades, uneven tire pressure	Sharpen blades; inflate tires to correct PSI.
Loss of power	Clogged deck, drive belt slipping	Clean deck; check belt tension and replace if worn.
Hydrostatic transmission sluggish	Low fluid, air in system	Check fluid level; purge air per manual.

Service: For technical support, call 1-888-331-4569 or visit www.craftsman.com.