Craftsman T110 Mower Manual

The Craftsman T110 is a 42-inch riding lawn mower featuring a 19.5 HP Briggs & Stratton engine, 6-speed manual transmission, electric start, adjustable cutting height (1.5-4 inches), mulching capability, and a 2.5-gallon fuel tank. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Specifications 5. Controls and Operation 6. Mowing Instructions 7. Maintenance Schedule 8. Storage & Winterization 9. Warranty Information 10. Troubleshooting

Features at a Glance

Key components: 19.5 HP Briggs & Stratton engine, 42-inch steel cutting deck, 6-speed manual transmission, electric start, adjustable seat, cup holder, and mulching kit compatibility.

Feature	Description
Engine	19.5 HP Briggs & Stratton, single-cylinder, OHV
Cutting Width	42 inches
Transmission	6-speed manual, gear-driven
Starting System	Electric key start with backup recoil
Cutting Height	Adjustable 1.5-4 inches (6 positions)
Fuel Capacity	2.5 gallons
Deck Material	12-gauge steel
Turning Radius	18 inches
Seat	High-back, adjustable
Mulching Capability	Standard (kit included)

Safety Information

Read all instructions before operation. Always wear appropriate safety gear.

Clear mowing area of debris, toys, and obstacles.
Do not mow on slopes greater than 15 degrees.
Keep hands and feet away from moving parts.
Never allow children to operate the mower.
Always engage parking brake when stopped.

WARNING! Gasoline is flammable; refuel outdoors with engine off and cool. Avoid carbon monoxide poisoning—never operate in enclosed spaces.

Assembly & Setup

Unpack and inspect all parts. Assembly requires basic tools (included).

Install steering wheel: Align and tighten bolt.
Attach seat: Mount with provided bolts and washers.
Connect battery: Attach red (+) then black (-) terminals.
Install cutting deck: Align with mounting points and secure.
Add engine oil: Use SAE 30 (approx. 48 oz).
Add gasoline: Use fresh unleaded (87 octane minimum).

CAUTION! Ensure all bolts are tightened to specified torque. Check for loose parts before first use.

Specifications

Model: Craftsman T110
Engine: 19.5 HP Briggs & Stratton, 540cc
Cutting Deck: 42-inch, 12-gauge steel
Transmission: 6-speed manual, gear-driven
Fuel Type: Unleaded gasoline (87 octane or higher)
Oil Type: SAE 30 (above 32°F), 5W-30 (below 32°F)
Cutting Height Range: 1.5 to 4 inches
Wheel Size: Front 15", Rear 20"
Weight: 415 lbs (approx.)
Warranty: 2-year limited

Controls and Operation

Familiarize yourself with all controls before starting.

Dashboard: Ignition key, headlight switch, hour meter, cup holder.

Control Levers: Blade engagement lever, parking brake, throttle, choke, gear shift (1-6, R).

Starting Procedure: 1. Sit on seat. 2. Engage parking brake. 3. Set throttle to fast. 4. Turn key to START. 5. Release key to RUN.

Stopping: 1. Disengage blades. 2. Set throttle to slow. 3. Turn key to OFF. 4. Engage parking brake.

Mowing Instructions

For best results, mow when grass is dry.

Adjust cutting height to desired level.
Start engine and allow to warm up for 1-2 minutes.
Engage blades with lever.
Release parking brake, select gear (start with 1 or 2).
Mow in straight, overlapping passes.
For slopes, mow up and down (not across).
Disengage blades when crossing driveways or gravel.

Tip: Change mowing pattern each time to prevent grass rutting.

Maintenance Schedule

Regular maintenance ensures long life and optimal performance.

Interval	Task
Before each use	Check tire pressure, inspect for damage, check oil level
Every 8 hours	Clean cutting deck, check blade sharpness
Every 25 hours	Change engine oil, check air filter
Every 50 hours	Replace spark plug, grease fittings
Every 100 hours	Replace air filter, check drive belt tension
Seasonally	Sharpen/replace blades, check battery

WARNING! Always disconnect spark plug wire before performing maintenance.

Storage & Winterization

Prepare mower for storage if not used for 30+ days.

Clean entire mower, especially under deck.
Add fuel stabilizer to tank and run engine for 5 minutes.
Change engine oil and filter.
Remove spark plug, add 1 teaspoon of oil, crank engine, reinstall plug.
Store in dry, covered location.

CAUTION! Do not store with fuel in tank for more than 30 days without stabilizer.

Warranty Information

Craftsman T110 includes a 2-year limited warranty covering defects in materials and workmanship. Warranty does not cover normal wear, misuse, or lack of maintenance. For warranty service, contact Craftsman at 1-888-331-4569 or visit www.craftsman.com. Keep original receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, empty fuel, clogged filter	Charge/replace battery; add fuel; replace air filter.
Poor cutting performance	Dull blades, low engine speed	Sharpen/replace blades; set throttle to fast.
Excessive vibration	Unbalanced blade, loose parts	Balance or replace blade; tighten deck bolts.
Loss of power	Dirty air filter, old fuel	Clean/replace air filter; drain and add fresh fuel.
Hard to shift gears	Low transmission fluid	Check fluid level; add if low (consult manual).

Reset: For electrical issues, disconnect battery for 5 minutes then reconnect.

Service: 1-888-331-4569; www.craftsman.com