Craftsman T110 Lawn Tractor Manual

The Craftsman T110 is a 19.5 HP lawn tractor designed for residential mowing and light-duty yard work. It features a Briggs & Stratton single-cylinder engine, 6-speed manual shift-on-the-go transmission, 42-inch stamped steel cutting deck, manual blade engagement, adjustable cutting height (1.5" to 4"), and a 2.5-gallon fuel tank. Below are key sections for safety, features, operation, maintenance, troubleshooting, and specifications.

1. Features at a Glance 2. Safety Information 3. Assembly & Setup 4. Controls & Operation 5. Specifications 6. Mower Deck Operation 7. Maintenance Schedule 8. Engine Care 9. Storage & Winterization 10. Troubleshooting 11. Warranty Information

Features at a Glance

Key components: 19.5 HP Briggs & Stratton engine, 6-speed manual transmission, 42-inch cutting deck, manual PTO engagement, adjustable seat, and cup holder.

Feature	Description
Engine	19.5 HP Briggs & Stratton single-cylinder, overhead valve (OHV)
Transmission	6-speed manual shift-on-the-go (Peerless)
Cutting Deck	42-inch stamped steel, 3-blade
Cutting Height	Adjustable 1.5" to 4" in 0.5" increments
Fuel Tank	2.5-gallon capacity
Turning Radius	Approximately 18 inches
Seat	High-back, adjustable fore/aft
Headlights	Two integrated headlights
Blade Engagement	Manual PTO lever
Drive System	Rear-wheel drive

Safety Information

Read and understand all safety instructions before operating.

Clear mowing area of debris, toys, and obstacles.
Do not carry passengers; operator only.
Do not mow on slopes greater than 15 degrees.
Always engage parking brake when dismounting.
Keep hands and feet away from moving parts.

WARNING! Gasoline is flammable; refuel outdoors with engine off and cool. Do not smoke near fuel.

Assembly & Setup

Unpack and inspect contents. Assembly requires basic tools.

Install steering wheel: Align and tighten bolt.
Attach seat: Mount with provided bolts and washers.
Install battery: Connect red (+) then black (-) terminals.
Add engine oil: Use SAE 30 or 10W-30, check dipstick.
Add gasoline: Use fresh unleaded (87 octane minimum).
Check tire pressure: Inflate to 14 PSI (front) and 10 PSI (rear).

CAUTION! Ensure all bolts are tightened securely. Follow torque specifications in manual.

Controls & Operation

Familiarize yourself with controls before starting.

Dashboard: Ignition key, throttle/choke, headlight switch, hour meter.

Steering/Driving: Steering wheel, gear shift lever (1-6, R), brake pedal, parking brake lever.

Mower Controls: PTO engagement lever, cutting height adjustment lever.

Starting Procedure: Sit on seat, set parking brake, disengage PTO, set throttle to fast, turn key to START. Stopping: Disengage PTO, set throttle to slow, turn key to OFF, engage parking brake.

Specifications

Engine: 19.5 HP Briggs & Stratton, single-cylinder OHV.
Displacement: 540 cc.
Fuel Type: Unleaded gasoline (87 octane or higher).
Transmission: 6-speed manual (Peerless).
Cutting Width: 42 inches.
Cutting Height Range: 1.5" to 4".
Wheels: Front 15x6.00-6, Rear 20x8.00-8.
Weight: Approximately 415 lbs.
Dimensions (LxWxH): 68" x 54" x 42".
Warranty: 2-year limited.

Mower Deck Operation

Engaging and adjusting the cutting deck.

Start engine with PTO disengaged.
Move to mowing area, set desired cutting height.
Engage PTO lever slowly to start blades.
Mow at steady pace; overlap passes for even cut.
Disengage PTO before stopping or changing height.
For transport, raise deck to highest position.

Tip: Keep deck clean of grass clippings to maintain performance and prevent rust.

Maintenance Schedule

Interval	Task
Before each use	Check tire pressure, engine oil, fuel level; inspect for loose parts.
Every 8 hours	Check mower deck for debris; clean if necessary.
Every 25 hours	Change engine oil (first change at 5 hours).
Every 50 hours	Replace air filter; check spark plug.
Every 100 hours	Replace spark plug; sharpen or replace mower blades.
Seasonally	Lubricate pivot points; check battery charge.

Note: More frequent maintenance may be required under dusty or heavy-use conditions.

Engine Care

Proper engine maintenance ensures long life.

Oil Change: Use SAE 30 or 10W-30 detergent oil. Capacity approx. 1.5 quarts.
Air Filter: Replace paper element; clean pre-cleaner if equipped.
Spark Plug: Gap 0.030"; replace annually.
Fuel Filter: Replace if clogged or annually.
Cooling Fins: Keep clean of debris for proper cooling.

WARNING! Disconnect spark plug wire before performing any maintenance.

Storage & Winterization

Prepare tractor for off-season storage.

Clean entire tractor, especially mower deck.
Change engine oil and replace filter.
Add fuel stabilizer to tank and run engine for 5 minutes.
Disconnect battery and store in cool, dry place.
Store in dry, covered location; elevate if possible.

CAUTION! Do not store with fuel in carburetor without stabilizer; it may cause starting issues.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	No fuel, bad spark, dead battery	Check fuel level; inspect spark plug; charge battery.
Poor cutting performance	Dull blades, low engine speed	Sharpen blades; set throttle to full speed.
Excessive vibration	Damaged/debris on blade, loose parts	Stop engine, inspect blades and deck; tighten bolts.
Loss of power	Clogged air filter, old fuel	Replace air filter; drain and refill with fresh fuel.
Battery not charging	Loose connections, faulty alternator	Check terminals; test charging system.

Reset: For safety interlock issues, ensure you are seated and parking brake is engaged.

Service: 1-888-331-4569; www.craftsman.com

Warranty Information

Craftsman T110 includes a 2-year limited warranty covering defects in materials and workmanship under normal residential use. Warranty does not cover wear items (blades, belts, tires), damage from misuse, lack of maintenance, or commercial use. Proof of purchase required. For warranty service, contact an authorized service center or call 1-888-331-4569.