craftsman m220 v20 manual

The Craftsman M220 V20 is a 20V MAX Lithium-Ion Cordless String Trimmer/Edger, part of the V20 series power tool platform. It features a variable speed trigger, 12-inch cutting swath, easy-load trimmer head, 2-in-1 functionality for trimming and edging, battery fuel gauge, and weather-resistant construction. Powered by a 20V MAX Lithium-Ion battery (sold separately or in kit). Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Operation 4. Specifications 5. Controls and Adjustments 6. Trimming & Edging Modes 7. Line Replacement 8. Battery & Charging 9. Care & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motor housing, shaft, trimmer head, auxiliary handle, battery compartment, charger.

Feature	Description
Variable speed trigger	Provides control over cutting speed
2-in-1 design	Converts from trimmer to edger
Easy-load trimmer head	Accepts 0.065" line; no tools required
12-inch cutting swath	Width of cutting path
Battery fuel gauge	LED indicators show remaining charge
Auxiliary handle	Adjustable for user comfort
Weather-resistant construction	For outdoor use
POWER button	Activates tool (with safety lock)
Battery release button	Removes battery pack
Head release lever	For converting to edger mode

Assembly & Setup

Unpack and inspect all parts. Ensure battery is charged.

Attach auxiliary handle: Slide onto shaft, tighten knob.
Install trimmer head: Align and push until it clicks.
Load trimmer line: Follow easy-load instructions.
Insert battery: Push into compartment until it clicks.

WARNING! Wear eye protection, gloves, long pants, and closed-toe shoes. Keep bystanders away.

First-Time Operation

Fully charge battery before first use.

Check area: Remove stones, wires, debris.
Hold trimmer: Grip main handle, rest on shoulder if needed.
Engage safety lock: Press and hold.
Squeeze trigger: Start at low speed.
Practice trimming: Swing in arc, keep head level.
Convert to edger: Press release lever, rotate head 90°.

CAUTION! Do not operate in wet grass. Avoid contact with fences, trees, buildings.

Specifications

Power Source: 20V MAX Lithium-Ion battery.
Cutting Swath: 12 inches.
Line Diameter: 0.065 inch.
Speed: Variable, up to 6500 RPM.
Weight (tool only): Approx. 7.5 lbs.
Shaft: Straight, non-adjustable.
Charger: Input 120V AC, 60Hz.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Adjustments

Main Handle: Trigger, safety lock. Auxiliary Handle: Adjustable height, locking knob. Battery Compartment: Release button, fuel gauge LEDs.

Adjustments: Auxiliary handle height, head angle (trimmer/edger). No electronic settings.

Safety Lock: Must be pressed before trigger works. Prevents accidental start.

Trimming & Edging Modes

Trimming: Default mode. Keep head parallel to ground, swing side-to-side.

Edging: Press release lever, rotate head 90° so line is vertical. Guide along sidewalk/driveway edge.

Ensure area is clear.
Hold tool firmly.
Work in smooth motions; avoid forcing.

Tip: For tall grass, work in layers. Overlap passes slightly.

Line Replacement

Use only 0.065" diameter trimmer line.

Disconnect battery.
Press head tabs, remove spool.
Remove old line, clean spool.
Feed new line through eyelets, wind evenly (arrow direction).
Leave 6 inches loose, reassemble spool.
Pull lines to release from holders.

WARNING! Never use metal line or thicker line. Wear gloves to protect hands.

Battery & Charging

20V MAX Lithium-Ion battery (model CMCB201).

Charging: Plug charger into outlet, insert battery. Red LED = charging; Green = fully charged.
Fuel gauge: Press button on battery to see charge level (1-4 LEDs).
Storage: Store battery in cool, dry place. Charge every 6 months if not used.

CAUTION! Do not charge near flammable materials. Use only Craftsman charger.

Care & Storage

After each use: Disconnect battery, wipe tool clean, inspect for damage.

Storage: Hang or store in dry area. Remove battery if storing long-term.

CAUTION! Do not use water or solvents to clean. Keep ventilation openings clear.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Craftsman; trademarks of Sears Brands, LLC. For support, visit www.craftsman.com or contact 1-888-331-4569. Battery disposal: Recycle according to local regulations.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Tool does not start	Battery dead/not inserted	Charge battery; ensure fully seated.
Line not feeding	Line tangled/worn	Replace line; ensure proper winding.
Reduced runtime	Old battery/heavy use	Charge fully; replace battery if old.
Head not rotating	Obstruction in head	Disconnect battery, clear debris.
Vibration/noise	Damaged head/loose parts	Inspect head; tighten all fasteners.

Reset: Remove battery for 1 minute, reinsert.

Service: 1-888-331-4569; www.craftsman.com