Craftsman LT1000 Parts Manual

The Craftsman LT1000 is a popular riding lawn tractor known for its reliability and ease of maintenance. This parts manual provides detailed information on components, part numbers, assembly diagrams, and replacement procedures for the LT1000 series. Below are key sections covering identification, engine parts, drive system, cutting deck, electrical system, maintenance, and ordering information.

1. Model Identification & Specifications 2. Engine Components 3. Drive Train & Transmission 4. Cutting Deck & Blade Assembly 5. Electrical System 6. Controls & Operator Station 7. Fuel & Lubrication System 8. Tires & Wheels 9. Maintenance Schedule 10. Parts Ordering & Warranty 11. Troubleshooting & Diagrams

Model Identification & Specifications

Locate your model and serial number on the frame under the seat or on the engine housing to ensure correct parts ordering.

Feature	Description
Model Series	Craftsman LT1000 (multiple variants: 917.xxxxxx)
Engine	Briggs & Stratton or Kohler, 17.5-19.5 HP, OHV
Transmission	Automatic (Tuff Torq K46) or Manual
Cutting Width	42-inch or 46-inch deck
Fuel Capacity	2-3 gallons (gasoline)
Weight	Approx. 500 lbs
Seat Type	High-back, adjustable
Battery	12V, 280 CCA
Blade Engagement	Manual PTO lever or electric clutch
Tire Size	Front: 15x6.00-6, Rear: 20x10.00-8

Engine Components

Common replacement parts for Briggs & Stratton and Kohler engines used in the LT1000.

Air Filter: Part # 492932S (paper) or 492932S (foam).
Spark Plug: Champion RC12YC or equivalent.
Oil Filter: Briggs & Stratton 492932S or Fram PH4967.
Fuel Filter: In-line, Part # 532139756.
Carburetor Kit: Includes gaskets and jets for rebuild.
Starter Motor: 12V electric starter, Part # 532192310.

WARNING! Disconnect spark plug wire before servicing engine. Use correct oil type (SAE 30 or 10W-30).

Drive Train & Transmission

The LT1000 typically uses a Tuff Torq K46 hydrostatic transmission. Key parts include:

Drive Belt: Part # 144959 (1/2" x 92-1/2").
Transaxle Fluid: 20W-50 motor oil or Tuff Torq oil.
Pulley Set: Idler, engine, and transaxle pulleys.
Shift Linkage: Rods and bushings for gear selection.
Axle Seals: Prevent fluid leaks from transaxle.

CAUTION! Transmission service requires lifting tractor securely. Do not overfill fluid.

Cutting Deck & Blade Assembly

Deck Shell: 42" or 46" stamped steel, Part # 532190417.
Blade: High-lift mulching blade, Part # 532190381 (42"), 532190382 (46").
Spindle Assembly: Includes bearing and housing, Part # 532190395.
Deck Belt: Part # 144959 (same as drive belt on some models).
Mandrel: Blade attachment bolt and washer kit.
Deck Wheels: Anti-scalp rollers, Part # 532190456.
PTO Clutch: Electric engagement, Part # 532192311 (if equipped).

Electrical System

12V system with key ignition, safety interlock switches, and lighting (if equipped).

Key Components: Battery, starter solenoid, ignition switch, safety switches (seat, brake, PTO), wiring harness, fuses (20A).

Part Numbers: Battery (U1-300), Solenoid (532192312), Ignition Switch (532192313), Seat Switch (532192314).

Testing: Use multimeter to check continuity on switches. Ensure all safety switches are engaged for starting.

Controls & Operator Station

Steering wheel, seat, pedals, and control levers.

Steering Wheel: 13-inch diameter, Part # 532192315.
Seat: High-back with springs, Part # 532192316.
Brake Pedal: Return spring and linkage.
Throttle/Choke Control: Cable and lever assembly.
PTO Lever: Manual engagement rod or electric switch.

Tip: Lubricate control linkages annually with white lithium grease.

Fuel & Lubrication System

Gasoline tank, fuel lines, oil fill, and filters.

Fuel Tank: 2-3 gallon plastic, Part # 532192317.
Fuel Cap: Ventilated, Part # 532192318.
Fuel Pump: Mechanical (engine-driven) on some models.
Oil Drain Plug: Magnetic, Part # 532192319.
Dipstick: Integrated with fill tube.

WARNING! Always use fresh gasoline; add stabilizer for storage. Change oil every 50 hours or seasonally.

Tires & Wheels

Standard tire sizes and replacement parts.

Front: 15x6.00-6, Part # 532192320. Rear: 20x10.00-8, Part # 532192321.

Valve Stems: Standard rubber. Wheel Bearings: Sealed cartridge type.

Inflation: Front: 14 PSI, Rear: 10 PSI (check sidewall).

Maintenance Schedule

Regular maintenance ensures longevity and performance.

Interval	Task	Parts/Supplies Needed
Every 25 hours	Check tire pressure, blade sharpness	Air gauge, file
Every 50 hours	Change engine oil, check belts	SAE 30 oil, oil filter, belt gauge
Every 100 hours	Replace air filter, spark plug	Air filter, Champion RC12YC
Seasonally	Grease fittings, check battery	Lithium grease, battery charger
As needed	Sharpen/replace blades, deck cleaning	Blade set, degreaser

Parts Ordering & Warranty

Original parts available through Sears PartsDirect or authorized dealers.

How to Order: Use model and serial number from your tractor. Visit www.searspartsdirect.com or call 1-888-331-4569.

Warranty: Limited warranty on parts (90 days to 1 year). Keep receipt for claims.

Returns: Unused parts in original packaging within 30 days.

Troubleshooting & Diagrams

Symptom	Possible Cause	Corrective Action
Engine won't start	Dead battery, bad solenoid, safety switch	Charge battery; test solenoid; ensure seat/brake engaged.
Poor cutting performance	Dull blades, low deck height	Sharpen/replace blades; adjust deck height.
Transmission slips/no drive	Low fluid, worn belt	Check fluid level; replace drive belt.
Excessive vibration	Unbalanced blade, loose spindle	Balance blade; tighten spindle bolts.
Battery drains quickly	Faulty alternator, parasitic draw	Test charging system; check for short circuits.

Exploded Diagrams: Refer to official Craftsman LT1000 parts diagrams for assembly views and part locations.

Service Support: 1-888-331-4569; www.searspartsdirect.com