The Craftsman 917.289452 is a riding lawn mower/tractor model. This parts manual provides detailed information on all components, assemblies, and replacement parts for maintenance, repair, and restoration. It includes exploded diagrams, part numbers, descriptions, and ordering information to ensure proper identification and sourcing of genuine Craftsman parts. Below are key sections covering identification, major assemblies, engine components, drive system, cutting deck, electrical system, and troubleshooting.
Key identifiers: Model number 917.289452, Serial number location (under seat or frame), Engine type (Briggs & Stratton or other), Horsepower, Cutting width, Transmission type.
| Specification | Description |
|---|---|
| Model Number | 917.289452 |
| Engine | Briggs & Stratton, XX HP, XX cc |
| Cutting Width | XX inches (typically 42", 46", or 50") |
| Transmission | Automatic or Manual, XX-speed |
| Deck Type | Stamped or Fabricated, Side Discharge/Mulch |
| Fuel Capacity | XX gallons |
| Oil Capacity | XX quarts |
| Battery | 12V, XX Ah |
| Tire Size (Front) | XX x XX inches |
| Tire Size (Rear) | XX x XX inches |
Complete breakdown of engine parts and related assemblies.
WARNING! Disconnect spark plug wire before servicing engine. Use proper tools and torque specifications.
Components for propulsion and speed control.
CAUTION! Ensure tractor is on level surface, parking brake engaged, and engine off before servicing drive system.
Wiring harness, switches, lights, and charging components.
Main Components: Battery, starter motor, solenoid, alternator/charging system, ignition switch, safety switches (seat, blade engagement), headlights, fuses.
Wiring Diagram: Color-coded diagram for troubleshooting. Connectors: Terminal ends, plugs, grounds. Switches: Key switch, PTO switch, hour meter. Lights: Headlight bulbs, sockets, wiring.
Steering, seating, and control components.
Tip: Lubricate control linkages periodically for smooth operation.
Structural and cosmetic parts.
WARNING! Support tractor securely with jack stands when removing wheels or working under frame.
Common wear items and hardware.
Belts: Drive belt (part number XXX), deck belt (part number XXX), tensioner springs. Filters: Air filter (part number XXX), oil filter (part number XXX), fuel filter. Hardware: Blade bolts, deck mounting bolts, hitch pins, cotter pins. Fluids: Recommended engine oil, hydraulic fluid, grease.
How to use exploded-view diagrams and order parts.
CAUTION! Use only genuine Craftsman parts for optimal performance and safety. Counterfeit parts may void warranty.
Regular maintenance schedule and safety precautions.
Daily: Check tire pressure, fluid levels, for debris. Every 25 hours: Change oil, check air filter. Every 100 hours: Replace spark plug, check belts. Seasonal: Sharpen/replace blades, lubricate fittings, battery care. Storage: Fuel stabilization, proper storage location.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Engine won't start | Fuel, spark, battery | Check fuel level, spark plug, battery charge, safety switches. |
| Poor cutting performance | Dull blades, deck level | Sharpen/replace blades, level deck, check belt tension. |
| Loss of power/drive | Drive belt, transmission | Inspect drive belt for wear/damage; check transmission fluid. |
| Excessive vibration | Unbalanced blade, loose parts | Stop engine, check blade balance and tightness; inspect spindle bearings. |
| Electrical failure | Blown fuse, bad connection | Check fuses; inspect wiring harness for damage/corrosion. |
Service Support: For technical assistance or to order parts, contact Craftsman customer service at 1-888-331-4569 or visit www.craftsman.com.
Exploded Diagrams: Refer to included diagrams for part numbers and assembly relationships.