Craftsman 917.250810 Parts Manual

The Craftsman 917.250810 is a riding lawn mower/tractor model. This parts manual provides detailed information, diagrams, and part numbers for the maintenance, repair, and replacement of components. It covers the engine, drive system, cutting deck, electrical system, controls, and body parts. Use this manual to identify correct replacement parts and ensure proper assembly and operation of your equipment.

1. Introduction & Safety 2. Model Identification & Specifications 3. Engine Parts & Diagrams 4. Drive System & Transmission 5. Cutting Deck Assembly 6. Electrical System & Wiring 7. Controls & Linkages 8. Body, Frame & Wheels 9. Fasteners & Hardware 10. Parts Ordering Information 11. Troubleshooting & Assembly Notes

Introduction & Safety

This manual is intended for use by qualified service personnel and owners familiar with mechanical systems. Always prioritize safety when performing maintenance or repairs.

Safety SymbolMeaning
WARNING!Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION!Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICEIndicates a practice not related to personal injury, such as potential damage to the equipment.

WARNING! Disconnect the spark plug wire before performing any maintenance or inspection to prevent accidental starting. Always work on a level surface and block wheels securely.

Model Identification & Specifications

Locate your model and serial number plate, typically found on the frame under the seat or on the rear fender. This information is critical for ordering correct parts.

Engine Parts & Diagrams

Exploded view diagram of the engine assembly with corresponding part numbers. Includes air filter, carburetor, spark plug, fuel lines, oil filter, muffler, and engine shrouds.

  1. Cylinder & Piston Assembly: Part # [Example: 123456X]
  2. Carburetor Kit: Part # [Example: 123457X]
  3. Air Filter Element: Part # [Example: 123458X]
  4. Spark Plug: Part # [Example: 123459X] (Gap: 0.030")
  5. Starter Motor: Part # [Example: 123460X]

CAUTION! Use only manufacturer-specified replacement parts. Incorrect parts can cause engine damage or unsafe operation.

Drive System & Transmission

Parts list for the transmission, drive belt, pulleys, axles, and related components.

ComponentPart NumberDescription
Drive Belt (Main)144959V-Belt, 1/2" x [Length]
Transaxle Assembly123461XComplete Hydrostatic Unit
Drive Pulley123462XEngine PTO Pulley
Idler Pulley123463XTensioner Assembly
Axle Key123464XFor Wheel Hub

Cutting Deck Assembly

Detailed breakdown of the mower deck, including blades, spindles, mandrels, belt, and deck shell.

  1. Blade (RH/LH): Part # 123465X (Length: [e.g., 21"])
  2. Spindle Assembly: Part # 123466X (Includes bearing and housing)
  3. Deck Belt: Part # 144960
  4. Deck Wash Port Plug: Part # 123467X
  5. Skid Shoe / Gauge Wheel: Part # 123468X

WARNING! Always ensure the blade is stopped, the ignition is off, and the spark plug is disconnected before inspecting or replacing deck components.

Electrical System & Wiring

Wiring diagram and parts for the battery, starter, solenoid, ignition switch, safety switches, and lights.

Controls & Linkages

Parts for the steering system, brake pedal, clutch/brake linkage, throttle control, and PTO engagement cable.

ControlPart Number
Steering Wheel123473X
Brake Pedal Assembly123474X
Throttle Control Cable123475X
PTO Engagement Cable123476X
Hydrostatic Drive Linkage Rod123477X

Body, Frame & Wheels

Parts for the frame, fenders, seat, tires, and wheels.

  1. Seat Assembly: Part # 123478X
  2. Front Tire & Wheel Assembly: Part # 123479X (Size: [e.g., 15x6.00-6])
  3. Rear Tire & Wheel Assembly: Part # 123480X (Size: [e.g., 20x10.00-8])
  4. Hood / Grill Assembly: Part # 123481X
  5. Fender (LH/RH): Part # 123482X

Fasteners & Hardware

Common bolts, nuts, washers, pins, and clips used throughout the tractor. Specify grade and thread where applicable.

Example Hardware Kit: Part # 123483X - Includes assorted flange bolts, lock nuts, and washers for deck mounting.

NOTICE: Always replace hardware with the same grade and size. Self-locking nuts (nylon insert) should not be reused.

Parts Ordering Information

To order parts, contact an authorized Craftsman service dealer or visit the online parts lookup. Have your model number (917.250810) and serial number ready.

  • Online: www.searspartsdirect.com or www.craftsman.com
  • Phone: 1-888-331-4569 (Sears PartsDirect)
  • At the Store: Visit a Sears or authorized Craftsman retailer with the part number.

Tip: Reference the associated diagram number from this manual when ordering.

Troubleshooting & Assembly Notes

IssuePossible CauseCheck Part / Action
Engine won't startDead battery, faulty solenoidCheck Battery (Part #), Starter Solenoid (123469X).
Loss of drive powerWorn or broken drive beltInspect and replace Drive Belt (144959).
Uneven cuttingBent blade, worn spindleReplace Blade (123465X) or Spindle Assembly (123466X).
Excessive vibrationUnbalanced blade, loose pulleyTighten hardware; replace damaged Blade or Pulley.
PTO won't engageFaulty switch or cableCheck PTO Switch and Cable (123476X).

Assembly Note: When installing the deck, ensure it is level side-to-side and front-to-back per the operator's manual specifications. Proper belt routing is critical.

Service Support: For technical assistance, contact 1-888-331-4569 or visit www.craftsman.com.

Craftsman 917.250810 Parts Manual © - All Rights Reserved 2025